Knowledge Hub

Fillet and chamfer are two common design features used at the edges where two surfaces meet. Both serve to remove sharp corners, making custom plastic parts safer and easier to handle. They also play an important role in manufacturing, assembly, and product performance by reducing stress concentrations and enhancing the overall appearance of custom parts.

The injection molding sprue act as the channel for plastic to enter the mold cavities. However, the placement and design of the sprue can greatly affect the finished part’s quality and the molding process efficiency. Let’s delve into sprues in injection molding and important considerations for their design and use. What Is a Sprue in

Molded parts designing is complex and involves a multitude of factors such as functional requirements, material selection, and structural considerations. Various elements, including wall thickness, draft, ribs, holes, and bosses, must be carefully considered to create effective molded part designs. This blog explores fundamental guidelines for molded parts plastic boss design. Following these guidelines can

Undercut in injection molding is a design that allows the creation of parts with complex shapes. However, these complex designs often present a challenge – molded parts with undercuts are difficult to remove from the mold. The undercuts also increase the complexity and associated costs of a project. In this article, We will explore what