What Can We Customize in Polyurethane Wheels?

We support customization across the full wheel structure, so changes are not limited to size. Tread formulation and hardness, diameter and width, core material and hub design, bonding, color and markings can all be defined to your requirements, and we can produce several variants of the same wheel for different equipment models.

Types

We customize polyurethane wheels by the role they play in your equipment. Load, traction, guiding and support each call for a different combination of tread material, wheel profile and core structure, and we produce each type to the specification you provide.
  • Load Wheels
  • Drive Wheels
  • Guide Wheels
  • Idler Wheels
  • Caster Wheels
  • Support Wheels

Size

Wheel size is defined by several dimensions that must work together, and we produce polyurethane wheels to the values you specify for each. Wheel diameter, tread width, bore and shaft dimensions can be set independently, which lets us match the wheel to your existing axle, housing or track without forcing a change to the surrounding parts.
  • Outer Diameter
  • Overall Width
  • Tread Width
  • Tread Thickness
  • Hub Diameter
  • Dimensional Tolerance

Hardness

Tread hardness is one of the most direct ways to change how a polyurethane wheel performs. We can produce treads from 20A to 85D, choosing a softer grade when grip, vibration damping or floor protection matters, and a harder grade when load capacity and low rolling resistance matter more. Hardness is specified per order, and we can supply different grades of the same wheel design for different equipment or operating conditions.

Carrying Capacity

We customize polyurethane wheels for both static and dynamic loads. Dynamic load is usually lower than static load because speed, impact and heat build-up reduce what the tread can carry, so we ask for both values. For heavy loads, we increase tread width and hardness and bond the tread to a steel or cast iron core. Common industrial wheels carry 200–1,000 kg each.

It is easy to fill the form.

Available for JPG, JPEG, PDF, DWG, DXF, PNG, STP, STEP, IGS and IGES files. Please note that all of your files will be kept confidential by Zhongde.

Why Choose Zhongde?

Wheels that run in pairs or sets need matching dimensions and hardness. We check outer diameter, width and bore with a CMM and micrometer, and we test tread hardness with a durometer on production parts, so each batch stays within the values on your drawing. This matters for drive wheels and load wheels in particular, where small differences in diameter or hardness cause uneven load sharing and faster wear. Consistent batches also mean repeat orders fit the wheels already installed in your equipment, and the same applies to how each wheel is finished and supplied.

Alongside the molded tread, we handle the steps that make the wheel ready to install. We bond treads to cores, apply color matching in Pantone or RAL, add laser etching or pad printing for markings, and fit customer-supplied bearings or bushings when your assembly calls for it. Wheels are packed to suit their size and weight, with options such as sets, labelled cartons or pallets, so they reach your line ready to install and are less likely to be damaged in transit. This reduces handling steps on your side.

Why Choose Zhongde 1

FAQs of Custom Polyurethane Wheels

View our FAQ center for more questions.
Yes. We bond treads to customer-supplied metal or plastic cores. Send the core drawing or sample, and we review the bond surface and structure before production.
Tolerance depends on wheel size and process. Outer diameter tolerances of ±0.1 mm are common for cast polyurethane wheels. Please mark critical dimensions on your drawing, and we check them with a CMM and micrometer, with hardness checked by a durometer.
Yes. We match colors to Pantone or RAL references, and we offer laser etching, pad printing and mold engraving for logos, part numbers and other identification.
Yes, when you supply them. We can fit customer-supplied bearings or bushings into the wheel as part of assembly, and pack the wheels in sets, labelled cartons or pallets.

Zhongde's Manufacturing Capabilities for Custom Parts

We offer various manufacturing methods to turn your custom parts designs into real components, from prototypes to full production, matching the right process to your needs.