What Can We Customize in Polyurethane Liners?

Our customization covers the parameters that decide how a polyurethane liner performs and fits. Material type and hardness, dimensions and thickness, shape and profile, mounting features, colors, and surface or marking details are all open to specification. With in-house cast molding and injection molding, we can produce simple flat panels as well as contoured liners with multiple fixing points.

Size

Liner dimensions follow your equipment, not a fixed size range. We produce polyurethane liners to the lengths, widths, thicknesses and diameters you specify, whether the application needs thin sliding strips or thick impact plates. Dimensions are set in the mold or casting tooling, so each size stays repeatable across production runs.
  • Length and width
  • Overall thickness
  • Inner and outer diameter
  • Height and depth
  • Radius of curvature for curved liners
  • Dimensional tolerance requirements

Hardness

We produce polyurethane liners across a hardness range of 20A to 85D, covering both soft, elastic grades and rigid grades. Lower hardness gives more cushioning against impact, and higher hardness gives better resistance to deformation under load. You specify the target based on your media, impact level and operating temperature, and we compare grades with you, then verify the result on the finished liner.

Assembly Features

Installation requirements vary with the equipment, and we customize the features that hold the liner in place to match. Fixing holes, slots, flanges and joint edges are specified by you and formed in the mold, so positions repeat accurately from one liner to the next and adjacent liners meet as intended.
  • Countersunk holes
  • Counterbored holes
  • Slotted holes
  • Hole spacing and layout
  • Raised lips and flanges
  • Molded-in metal inserts

Applications

Polyurethane liners are used where abrasive material flows, falls or slides against a surface. We produce liners for bulk material handling, mining and slurry equipment, with size, hardness and fixing features set for each application. The list below covers the equipment our customers most often specify them for.
  • Tank liners
  • Truck bed liners
  • Chute liners
  • bin liners
  • Pump liners
  • Hydrocyclone liners

It is easy to fill the form.

Available for JPG, JPEG, PDF, DWG, DXF, PNG, STP, STEP, IGS and IGES files. Please note that all of your files will be kept confidential by Zhongde.

Why Choose Zhongde?

Many liners are more than a block of polyurethane. Some carry metal components for fixing, some are supplied as matched sets for a full line, and some work in wet, oily or chemically active conditions. We evaluate the polyurethane formulation against the media and temperature you describe, integrate the metal components where the design calls for them, and assemble sets so the parts arrive ready to fit together. Custom packaging keeps flat and curved liners from deforming in transit, so large, heavy parts reach your site in the shape they were made.

Delivering the first order is only part of the job, because liners wear out and the same position will need the same liner again. Consistency between orders matters as much as the first batch. Because our molds are used for our own production, the tooling for your liner stays in our facility, and reorders run on the same mold and material settings, with hardness and dimensions checked against the original specification. If a position fails sooner than expected, we can adjust thickness or hardness at the mold or process level without restarting the project.

Why Choose Zhongde 1

FAQs of Custom Polyurethane Liners

View our FAQ center for more questions.
Send a drawing, a 3D CAD file or a worn sample, together with the quantity, the hardness you need and the media the liner will contact. If the liner has fixing holes or slots, include the mounting layout.
We offer both. The choice depends on liner size, geometry and order quantity, and we recommend the process after reviewing your drawing.
Liners can be made in Pantone or RAL colors, and part numbers or logos can be added by laser etching or mold engraving.
We work from your drawing or sample rather than designing the liner for you. Our engineers review it for manufacturability and can suggest thickness, hardness or material adjustments before tooling.

Zhongde's Manufacturing Capabilities for Custom Parts

We offer various manufacturing methods to turn your custom parts designs into real components, from prototypes to full production, matching the right process to your needs.