Zhongde (Beijing) Machinery Equipment., Ltd.

ZHONGDECustomizing | Manufacturing

CLOSE

Custom Products Center

Cast Molding Service

Low-Volume Production
Advanced Prototyping
Market Testing

Get a Quote

Cast molding refers to the processing process in which liquid raw materials are poured into a mold and cooled and solidified at room temperature.


Zhongde has many years of casting experience. Our experienced engineers can accurately analyze whether the product is suitable for casting products according to the product structure.

Advantages of Cast Molding

Low-volume production
Low-volume production
High accurate production
High accurate production
A wide variety of finish options
A wide variety of finish options
Rapid turnaround on parts
Rapid turnaround on parts
Durability for maximum wear and strength
Durability for maximum wear and strength

Cast Molding Capabilities


Name

Description

Rapid tooling

Mold working life time up to 20,000 runs. Short machined time.

Production tooling

Traditional molds, used for mass production

Multi cavities moulds

Moulds can produce more than one part per cycle, used to increase production rate.

Family moulds

Moulds produce two or more different parts per injection cycle, the parts should be of the same material and color.


Cast Molds Service


NameDescription

Mold Material

Steel P20, H13, S136, 2316, 2344, 083,718H, SKD618, etc.

Mold Type

Family molds, single and multi-cavities molds

Mold Storage

3 years inactivity

Guaranteed Mold Life

Unlimited

Mold Remachining

We can remachine the molds if there are any changes required, basis on mold structure

Mold Warranty

Lifetime warranty on production molds

Maximum Dimensions

2500mm*2000mm


Guideline of Cast Molding


Size of Cast Molding


The below table shows the size of Casting Molding parts we usually make. If you need a larger size, we can also help you achieve it.


SizeMetricInch
Length250098.4
Width200078.7


Available material of Cast Molding

  • PU | Polyurethane

  • MC Nylon

  • LSR | Liquid Silicone Rubber


Surface finishing of Cast Molding

  • Painting

  • Inserts

  • Silk screening

  • Custom processes

  • Transparent parts

  • PMS color matching


Related Products

Casting Bumper

Casting Bumper

Casting Bushing

Casting Bushing

Casting Damper

Casting Damper

Casting Pad

Casting Pad

Nylon Casting Pulley

Nylon Casting Pulley

Silicone Casting Button

Silicone Casting Button

FAQs of Cast Molding

What is the difference between cast nylon and extruded nylon?

Cast nylon tends to be slightly more ductile than extruded 6/6 nylon, it can procduced in much larger shapes and tends to be more cost-effective in larger cross-section shapes.

What is the difference between molding and casting?

Molding or Mold making is the act of creating the cavity that carries a negative or reverse impression of an original model. Casting is the act of pouring liquid material into the cavity of a mold.

Does casting resin shrink?

All resins shrink when they change from liquid to solid and all generate heat as they polymerize, and this causes problems. Because heat accelerates chemical reactions, all resins cure from the inside out.

Leave a Message

Please leave your message here! We will send detail technical info and quotation to you!

Upload

Knowledge Hub
What Are the Factors That Affect the Precision of Injection Mold Tooling?

May 24-2021

What Are the Factors That Affect the Precision of Injection Mold Tooling?

Design Principle of Auto Mold Straight Top Block, Thimble, Insert Needle and Drum

May 17-2021

Design Principle of Auto Mold Straight Top Block, Thimble, Insert Needle and Drum

Have a Question ? Get in Touch

Email us with any questions or inquiries or use our contact data. We would be happy to answer your questions.

Get a Quote