ZHONGDECustomizing | Manufacturing
Mar 08-2021 Views: 3120
The injection moulding principle is that the plastic is heated and melted in the heating barrel of the injection molding machine, and then the melt is pushed into the cavity of the closed mold by the plunger or reciprocating screw. It not only can produce high-precision, high-quality products under high productivity, but also has a wide variety of processed plastics and wide uses. Therefore, injection molding is one of the important molding methods in plastic processing.
1. Basic functions of injection molding machine
Plastic molding is achieved by injection molding machines. The basic functions of the injection molding machine are: ① heat the plastic to reach a molten state; ② apply high pressure on the melt to inject it and fill the cavity.
2. Injection molding process/equipment
The plastic molding operation of thermoplastics is generally composed of plasticizing, filling, compacting and cooling. The needed equipment is an custom plastic china molding machine, which is composed of injection mold tooling and auxiliary equipment (such as material drying)
3. Intro to injection molding
Introduction to injection molding: The injection device mainly realizes the functions of plasticizing, metering, injection and pressure maintaining and shrinking in the process of the China precision plastic injection moulding machine. The screw injection device is the most used, it is made by unifying the screw plasticizing and injection plunger into one screw. Check more details about injection molding process.
In essence, it should be called a coaxial reciprocating rod injection device. When it is working, the plastic in the hopper falls into the heating barrel by its own weight. Through the rotation of the screw, the plastic moves forward along the screw groove. At this time, the material is heated by the external heater of the heating barrel and inside cutting that the temperature rises to a molten state.
With the storage of materials at the front end of the heating barrel, the reaction force (back pressure) generated by these materials pushes the screw backwards, and the limit switch is used to limit the amount of retreat. When it retracts to a certain position, the screw stops rotating, which (Measurement) is determined by the amount of injection at one time.
After the material in the mold is cooled, once the product is taken out, the mold is closed again to enter the injection process. At this time, the hydraulic cylinder (injection cylinder) of the injection device exerts force on the screw, and the screw becomes an injection rod under high pressure. The melt is injected into the mold from the nozzle.
The screw injection device is composed of screw, barrel, nozzle and driving device. The injection screw is generally divided into three stages: feeding, compression, and metering, with a compression ratio of 2 to 3 and a length to diameter ratio of 16 to 18. When the melt is ejected from the nozzle, because the injection force on the pressurized melt is afraid of the reaction force, a part of the melt will flow back to the rear through the screw groove. To prevent this phenomenon, a check valve is installed at the end of the screw. For rigid PVC, a conical screw head is used.
①The barrel is the part that contains the screw, which is heat-resistant. Made of high-pressure resistant steel. Install an array of electric heating coils on the periphery of the barrel to heat the material in the barrel, and use a thermocouple to control the temperature so that the plastic has an appropriate temperature.
②The nozzle is the transition part connecting the barrel and the mold, and an independent heating ring is installed on it, because it is an important part that directly affects the melting of the plastic. Generally, open nozzles are generally used for injection molding for low viscosity polyamides and a needle valve nozzle is used.
③The rotation of the drive screw can be driven by an electric motor or a hydraulic motor, and the reciprocating movement of the screw is realized by hydraulic pressure.
The parameters of the injection molding machine characterized by the injection device are: the injection volume refers to the maximum amount that the injection molding machine can inject into the mold each time, which can be expressed by the quality of the injected polystyrene melt or the volume of the injected melt; the injection pressure refers to the pressure exerted on the section of the barrel during injection; the injection speed refers to the moving speed of the screw during injection.
4. Mold clamping device
In addition to completing the opening and closing actions of the mold, the mold clamping device's main task is to resist the high pressure of the melt injected into the mold with sufficient force to lock the mold. Do make it closed.
Regardless of whether the clamping mechanism is mechanical or hydraulic, it should be flexible, punctual, fast and safe. From the technological requirements, the opening and closing of the mold must have a buffer effect, and the running speed of the template should be fast and then slow when the mold is closed, and slow first and then continue to slow when the mold is opened. To prevent damage to molds and injection molding machine parts and functions.
The force applied to the mold in order to keep the mold closed during the molding process is called the clamping force, and its value should be greater than the product of the cavity pressure and the projected area of the China injection parts (including the runner). The average pressure in the cavity is generally between 20~45Mpa.
Since the clamping force line reflects the size of the molded product area of the injection molding machine, the maximum clamping force of the injection molding machine is often used to indicate the specifications of the injection molding machine, but there is also a roughly proportional relationship between the clamping force and the injection volume. However, the clamping force representation method does not directly reflect the size of the injection product, or it is not convenient to use. Many manufacturers in the world use clamping force/equivalent injection volume to indicate the specifications of injection molding machines. For injection volume, in order to have a common comparison standard for different machines, the theoretical injection volume when the injection pressure is repeated 100Mpa is specified, that is, equivalent injection. Volume=theoretical injection volume*rated injection pressure/100Mpa.
5. Control system
Injection molding machine hydraulic control system is mainly divided into conventional hydraulic control system, servo control system and proportional control system. Due to the complexity of the hydraulic system, a proportional valve oil circuit system is taken as an example to illustrate the outline. The characteristic of this system is: there is a proportional element (electromagnetic proportional flow valve or electromagnetic proportional flow directional valve, electromagnetic proportional pressure valve) that controls the flow and pressure in the oil circuit system.
Through the proportional action of the external given electric simulation signal and the magnetic force, the opening amount of the valve core or the spring force of the valve core is controlled to control the system flow or pressure, so as to achieve the proper injection speed, screw speed, opening and closing speed and injection pressure, holding pressure, screw torque, injection seat thrust, ejection force, mold protection pressure implemented in single-stage, multi-stage control or stepless control.
In addition, we also supply insert molding injection, overmold injection molding and custom rubber injection molding. Our smart injection molding services have gained many overseas good feedbacks in the past years.
Single parting surface injection mold toolingWhen the mold is opened, the movable mold and the fixed mold are separated to take out the plastic part, which is called a single parting surface mold, or ...
Plastic die moulds are tools that are matched with plastic molding machines in the plastic processing industry to give plastic products a complete configuration and precise dimensions. According to th...